Netgear AC1750 Firmware Update Failure: Fixed

December 7, 2022 Sahil

Firmware updates are often overlooked by most Netgear extender users. However, these are very important for your device to run smoothly. You can get the firmware updated on your Netgear AC1750 extender by using the manual method but using the Nighthawk app remains the most convenient way for this process. Users often are observed reporting issues while upgrading their Netgear extenders. Although the entire firmware updating process is fairly easy, users can at times get stuck somewhere in the middle of the process. So, if you have a Netgear AC1750 setup done at your home and you are unable to get through the firmware upgrading process, then use this guide to fix the issues that you are encountering.

Why Can’t I Update Netgear AC1750 Firmware?

If you have been trying to update the firmware on your Netgear extender, but got no success then have you tried to figure out why is this not happening? We shall help you here.

Power Supply Interrupted

This is the most common reason that leads to firmware update failure. While you are trying to update the firmware if the power supply gets interrupted then the chances of getting the firmware corrupted become high. This won’t let you proceed further to complete the process.

Solution for Netgear AC1750:

Ensure a trouble-free power supply to the Netgear range extender. Check the power socket as well for any damages. Make sure there is no power outage in the area that is hampering the firmware update.

Faulty Internet Signal

Did you check the internet speed prior to performing the firmware update? A faulty or weak internet signal will stop you from getting the update done on your device.

Solution:

Instead of a wireless connection, opt for a wired connection between the extender and the router. Thus, use a new or damage-free Ethernet cable to connect your extender to the host router to ensure a stable internet signal.

Incorrect Web Address to Log In

To update the firmware you can either log in to the extender by using the web browser or use the Nighthawk app. If you are trying the web browser method, then there is a possibility that you are using an incorrect web address to get to the settings of the Netgear AC1750 extender.

Solution:

Use the correct web address which is www.mywifiext.net. Make sure you enter it correctly into the URL bar without any spelling errors. You can also use the default IP address 192.168.1.250 to access the settings and then update the firmware.

Flawed Web Browser

Have you not updated your web browser for a long time? Is your browser filled with junk files? This could be the possible culprit then.

Solution:

Accumulated cache and junk files can prevent you from accessing the web page that you need to update the firmware. Consider flushing out the cache, cookies, and browsing history from the browser. Also, get the browser updated to the latest version to have a smooth experience while updating the firmware on your Netgear AC1750 range extender.

Troubleshooting Netgear AC1750 Firmware Update Failure Issues

If the above-mentioned points have not been of any help till now, then go for some more troubleshooting steps as discussed ahead.

Reboot Netgear AC1750 Extender

Some minor technical glitches may be preventing you from getting the firmware update done on your Netgear device. Rebooting will help in such a case. Do this:

Turn the Netgear range extender power supply off.
Unplug the power adapter from the wall socket.
Detach any other connecting cables as well.
Let the extender rest for a couple of minutes.
Attach all the cables.
Plug in the power adapter back into the power socket.
Turn the power supply on.

Now, try to update the firmware by accessing the mywifiext.net setup page to access the settings. Has the issue been fixed? If still no success, then move to the next step.

Reset Netgear Range Extender

Locate the Reset button on the device and push it. This will reset your Netgear device and reload the factory settings on it by deleting the current settings. Any technical issue will also get kicked out in the process. Once the reset is completed, reconfigure the Netgear AC1750 extender.

The Final Note

We end this article here with the hope that you are able to get through the firmware update process smoothly after following the aforementioned tips and tricks.